Santa Clara University

Non-Degree Programs - openuniversity

banner

Open University

Open University allows the students to:

Tuition and Fees:
Students in the Open University pay the same tuition and fees as other graduate students in the program. The tuition for 2009-10 is $710 each quarter unit, plus a $135 course and lab fee.  Our academic quarters are 10 weeks in duration (with the exception of Summer Sessions I and II), with finals held during the 11th week:

Fall 2009 (9/21/09-12/04/09)
Winter 2010 (1/04/10-3/12/10)
Spring 2010 (3/29/10-6/4/09)

Summer 2010:
1st 10-week session 6/14/10-8/21/10
2nd 5-week session 6/14/10-7/16/10
3rd 5-week session 7/26/10-8/27/10

Back to the Top

Application Requirements:

  1. Complete the Online Application. (Please note:  Santa Clara University does not issue F-1 visas to applicants who wish to enter directly into the Open University)
  2. Send or fax one photo copy of your bachelor's degree or diploma to the following address: INFOCOMM1005

Engineering Graduate Services
School of Engineering
Santa Clara University
500 El Camino Real
Santa Clara, CA 95053-0583

Email: GradEngineer@scu.edu
Phone: 408-554-4313          Fax: 408-554-4323

Back to the Top

Registration Procedures:
After your application is received and processed, your student ID# and password will be sent to your preferred email address directly from our IT department. You will be assigned a registration appointment and will enroll in your classes online via ecampus. You will be taking the same courses as the degree-seeking students and are held by the same registration dates and deadlines.  You will pay the same tuition rate as the other graduate students.

Back to the Top

Transfer to a Degree Program:
If you would like to apply to a degree program later on, you will need to follow the same procedures required of the degree-seeking applicants, except that you will not need to pay the application fee again.  The general GRE test requirement for admission to the master's degree program can be waived if the following two conditions are satisfied, effective winter 2008:

  • The student has completed a set of required courses in the department to which they are applying.
  • The student has achieved a GPA of 3.5 or above in these courses.

(PLEASE NOTE:  Official transcripts will still be required as part of the admissions process.)

 In general, up to 16 units taken in the Open University program can be transferred into the M.S. program. However, students who wish to do so should make sure that these courses conform to the departmental requirements in their chosen area of specialization.

Required Courses for Waiving the GRE, by department:

  • Applied Mathematics
    Any set of AMTH courses for a total of 8 units are acceptable.
  •  Civil Engineering
     A minimum of 12 units of course work in either of the two option tracks detailed below; 
    all course work must be completed in one of the two specified optional tracks:

    Structural Engineering
    CENG 205, CENG 206, CENG 222, CENG 233, CENG 234, CENG 236, CENG 237, CENG 239, CENG 246
    General Civil Engineering
    CENG 218, CENG 219, CENG 237, CENG 242, CENG 249, CENG 250, CENG 251, CENG 260, CENG 269
  • Computer Engineering
    Computer engineering requires three specific 4 unit courses for each of its degrees:

M.S. Computer Engineering Degree (12 units)
1. COEN 210: Computer Architecture (4 units)
2. COEN 279:(Cross-listed as AMTH 377) Design and Analysis of Algorithms (4 units)
3. COEN 283: Operating Systems (4 units)

M.S. Software Engineering Degree (12 units) **
1. COEN 260: Truth, Deduction and Computation (4 units)
2. COEN 275: OO Analysis, Design and Programming (4 units)
    or COEN 359: Design Patterns (4 units)
3. COEN 285: Software Engineering (4 units)

**The above only waives the GRE requirement and not other requirements of admission. A student applying to the MSSE program who does not hold a B.S in a computing-related field is required to take the GRE subject test. That requirement cannot be waived by the taking the above three courses and earning a GPA>=3.5

Electrical Engineering Four courses must be chosen from the following set (for a total of 8 units):
1. Electromagnetic fields (ELEN 201 or 202)
2. Control systems (ELEN 232, 236, or 333)
3. Electronics (ELEN 252, 261, 264, or 270)
4. Networks (ELEN 211)
5. Digital systems (ELEN 500 or 603)

  • Mechanical Engineering

    The admission requirement for the transfer to the Master's Program is a total of 8 or more units with a GPA of 3.5 or above from the courses and course sequences listed under each topic area.  Most of the offerings in ME are 2-unit courses.  All courses considered must be in one topic area, and sequences as listed must be completed for the units to count towards the total. MECH 202 must be one of the courses applied to computing the GPA.

Dynamics & Controls

  • MECH 202, Mathematical Methods in Mechanical Engineering
  • MECH 203-204, Analytical Dynamics I and II
  • MECH 214-215-216, Advanced Dynamics I, II, and III
  • MECH 217-218, Introduction to Control I and II
  • MECH 305, Vibrations I
  • MECH 323-324, Modern Control System Design I and II

Materials

  • MECH 202, Mathematical Methods in Mechanical Engineering
  • MECH 256, Introduction to Biomaterials
  • MECH 281, Fracture Mechanics and Fatigue
  • MECH 330, Atomic Structure and Defects
  • MECH 331, Phase Equilibria and Transformations
  • MECH 332, Electronic Structure and Properties
  • MECH 333, Experiments in Materials Science
  • MECH 345, Modern Instrumentation and Experimentation

Design

  • MECH 202, Mathematical Methods in Mechanical Engineering
  • CENG 205, Finite Element Methods I
  • CENG 206, Finite Element Methods II
  • CENG 207, Finite Element Methods III
  • MECH 275, Design for Competitiveness
  • MECH 285, Computer-Aided Design of Mechanisms
  • MECH 325, Computational Geometry for Computer-Aided Design and Manufacture I
  • MECH 326, Computational Geometry for Computer-Aided Design and Manufacture II
  • MECH 415, Optimization in Mechanical Design

Robotics

  • MECH 202, Mathematical Methods in Mechanical Engineering
  • MECH 207-208-209, Advanced Mechatronics I, II, and III
  • MECH 218-219, Guidance and Control
  • MECH 315-316, Advanced Digital Control
  • MECH 323-324, Modern Control
  • MECH 337-338, Robotics I and II

Thermofluids

  • MECH 202, Mathematical Methods in Mechanical Engineering
  • MECH 225, Gas Dynamics I
  • MECH 228, Equilibrium Thermodynamics
  • MECH 238, Convective Heat and Mass Transfer I
  • MECH 266, Fundamentals of Fluid Dynamics
  • MECH 270, Viscous Flow I